Soft Eye (Turn-Back Mechanical Splice) Steel Wire Rope Sling Production
May 10, 2021 Steel Wire Rope Slings are routinely produced in our factory; it is often laborious and time-consuming to manufacture a large-diameter steel wire rope sling, especially in the turnback eye splicing (mechanical) process.
The mechanical splicing work, where coordination to handle the heavy wire rope to achieve the sling eye accuracy is most critical. Other than the manual effort involved, the process also poses certain injury risk for the operator/ technician performing it if they are not careful.
In Sing Teck Leong, in order to eliminate the above undesirable impact, we have invested in acquiring the 1000T Talurit RBS Swager to assist in the wire rope sling production. The RBS acts as a mechanical assistant, to help the user form the wire rope sling (turn back) eye shape with accuracy, and sets it for swaging, hence relieving our team of the laborious handling work and improving the work productivity.
Check out on our short video below to see how our team produces the large diameter, soft eye, steel wire rope sling ( focusing on the turn back eye splice process ) using the RBS swager.
Looking at multiple legged slings instead? check out the link below, where we assemble & produce a 2-legged thimble-eye sling.
LINK: WIRE ROPE SLING ( 2-LEGGED) ASSEMBLY
Need any help to produce your steel wire rope slings? Feel free to contact us!
Refer to the link below for STL Steel Wire Rope Slings...
LINK: STEEL WIRE ROPE SLING ASSEMBLY